The horizontal Torget H radiator is one of the recently added models offered by Radeco. Its structure consists of squared 30x30 mm profiles connected to each other and laid horizontally in a slim body. The narrow and horizontal construction will make an integral complement of room design, perfectly replacing cast-iron radiators. Recommended wherever there is not space for a traditional vertical bathroom radiator. The radiator is available in all RAL and Radeco structural palette colours. Each radiator is equipped with a cap, vent and a set of fasteners. Available in four versions of different dimensions and heating power.
The above main picture shows the radiator in the following version:
- Valve: Elegant chrome set
- Colour: Saturn 4
model | Height H | Width S | Length L | Surface | Weight | Volume | Heater power | Power [W] | ||
TORGET H | [mm] | [mm] | [mm] | [m2] | [kg] | [dm3] | [W] | 90/70/20 | 75/65/20 | 55/45/20 |
TORGET H 1 | 600 | 790 | 550 | 1,65 | 23,2 | 8,8 | --- | 730 | 585 | 315 |
TORGET H 2 | 600 | 980 | 550 | 2,01 | 27,5 | 10,9 | --- | 895 | 715 | 385 |
TORGET H 3 | 600 | 1208 | 550 | 2,43 | 32,6 | 13,4 | --- | 1085 | 870 | 470 |
TORGET H 4 | 600 | 1398 | 550 | 2,78 | 36,8 | 15,5 | --- | 1255 | 1005 | 540 |
Download 3D models of radiators
Standard connections:
Side connection radiator |
|
Cross connection radiator |
Colours:
any color - included in the price of the radiator |
Dedicated valves:
Thermostatic valves are not delivered with the radiator..
Set of valves "Swing" |
Vision" thermostatic set |
Accessories:
The accessories presented below are not included with the radiator and are separate products that can increase the functionality and possibilities of practical use of the radiator.
Heater rails | |
Hanger |
Permissible operating parameters:
- max water pressure: 1.0 Mpa
- max water temperature: 95°C
Radiators can be used in low temperature water heating plants of an open system meeting the requirements of PN-091/B-02413 or close system plants meeting the requirements of PN-091/B-02414, in which materials having contact with water and the quality of water comply with the requirements of PN-93/C-04607.
Steel radiators are intended to be used only in a central heating system.
Radiators should be installed in utility rooms without contact with a caustic environment.
Installation
Radiators are equipped with two 1/2” diameter connection pipes. Each radiator is equipped with a cap, vent and a set of fasteners. Arrangement of the radiator in the room should correspond to the central heating system design. It is recommended to install the radiator at the lowest level possible while maintaining its function of a dryer, however, at least 100 mm from the floor.
Maintenance
There are no specific requirements for radiators with standard (powdered paint) coatings. It is not acceptable to clean the radiators with abrasive pastes and preparations, etc. Particular care should be exercised when cleaning patina or brass coatings due to its layer of varnish protecting the brass from oxidation.
Water and mild detergents are recommended for care.
It is absolutely not allowed to use aggressive liquids intended for cleaning washing facilities, petrol, solvents, etc.